详细介绍：
美孚OGL007|Mobilgear OGL007|开式齿轮润滑脂
产品说明： 美孚OGL007开式齿轮润滑脂是一种高性能的采用先进技术的润滑剂，它融合了极压添加剂和承受重载的石墨。
美孚开式齿轮润滑脂包含了美孚OGL007,009和461。
产品特性：
1.提供杰出的重载性能，
2.高黏附性，在极端工况下抗“抛摔”。
3.的柔软的稠度和低温特性，能适应宽粘度范围的喷射操作。
4.优良的质量和精细的分散石墨，这些对于处于边界润滑状态的齿轮，特别是在重载低速的典型大开始车轮具有良好的保护作用。
产品应用：
美孚OGL007开式齿轮润滑脂主要用于大型、慢速和中速、重负荷齿轮的润滑。专门为大型、低速和中速、重载的齿轮提供有效润滑而设计。采矿工业，包括在高温环境下运行，例如，水泥炉窖和球磨机上的环形齿轮。钢铁，水泥，造纸和化学领域。
美孚齿轮OGL007,009能为齿轮提供便利的喷射润滑，美孚齿轮OGL461也适用于新安装的开式齿轮在初次运行状态下表面的润滑。
Mobilgear OGL 007, 009 and 461 are high performance advanced technology lubricants which incorporate both extreme pressure additives and finely dispersed graphite for load carrying. They are intended primarily for the lubrication of large, slow to medium speed, heavily loaded gears. In addition to providing outstanding load carrying, they are formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions.Mobilgear OGL 007, 009 and 461 are easily pumped from drums to application spray nozzles with conventional transfer pumps.The soft consistency and the low temperature properties of Mobilgear OGL 007, 009 and 461 are suited to spray applications operating under a wide variety of conditions. Mobilgear OGL 007, 009 and 461 are formulated with a carefully specified quality of finely dispersed graphite which contributes significantly to wear prevention under the boundary lubrication conditions found in the high load / slow speed operations typical of large open gearing.
Mobilgear OGL 007, 009 and 461 are leading members of the Mobilgear brand of products that enjoy a worldwide reputation for performance and innovation. Developed by ExxonMobil research scientists and backed by a worldwide technical support staff, Mobilgear OGL 007, 009 and 461 have provided excellent protection and performance in large open gearing in a wide variety of industrial applications.Mobilgear OGL 007, 009 and 461 were developed to meet the requirements of Original Equipment Manufacturers (OEMs) and the needs of customers who prefer to use a soft to semi-fluid grease for heavily loaded, slow to medium speed open gearing. A critical need for products of this type is to separate the heavily loaded gear teeth and avoid surface wear and damage. Mobilgear OGL 007, 009 and 461 are formulated with a specific quality of finely dispersed graphite which has been shown by our researchers to contribute significantly to the elastohydrodynamic (EHL) film thickness under the high load / slow speed conditions typical of large open gearing.
Mobilgear OGL 007, 009 and 461 are designed for the lubrication of large, slow to medium speed, heavily loaded gears in heavy-duty applications.Mobilgear OGL 007 and 009 are conveniently applied by spray on gear teeth.Mobilgear OGL 461 is also suitable to prime the surfaces of newly assembled open gears in order to provide lubrication during initial turning.The Mobilgear OGL Series is used in a wide variety of industrial sectors including
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Mobilgear OGL 007, 009 and 461
Grease
Product Description
Features and Benefits
Features
Advantages and Potential Benefits
Special formulation provides outstanding load-carrying and anti-wear properties
Superior protection against wear and reduced gear replacement costs
Excellent pumpability and sprayability for the semi-fluid NLGI 00 grades
Efficient operation, good low temperature start-up and reduced energy consumption
Very good protection against rust and corrosion
Longer equipment life, reduced downtime and reduced maintenance costs
Very good adhesive nature of the product
Reduced fling-off, consumption and lower lubricant costs
Absence of lead, nitrite and solvent
Reduced impact on the environment
Applications
Typical Properties
Mobilgear OGL
007
009
461
NLGI Grade
00 - 0
00 - 0
1.5
Colour, Visual
Black
Black
Black
Penetration, Worked, 25°C, ASTM D 217, mm/10
405
405
305
Dropping Point, °C, ASTM D 2265
200
200
200
Viscosity of Oil, ASTM D 445
cSt @ 40°C
460
1500
460
FZG Gear Test, DIN 51354, A/2.76/50 Fail Stage
12+
12+
Not Applicable
Wear, mg/kWh
0.25
0.25
Not Applicable
4-Ball Wear, ASTM D 2266, Scar, mm
0.5
0.5
0.6
4-Ball Weld Test, ASTM D 2596, weld load, kg
800
800
800
Corrosion Protection, ASTM D 1743
Pass
Pass
Pass
Health and Safety
粤公网安备 44030602003087号